Analog Integrated Circuits
Ten lessons from the single transistor to a compensated op-amp, a bandgap reference, layout matching and noise. Each lesson has theory, a quiz, and an interactive lab with real schematic symbols and live current flow. Models are hand-analysis level (long-channel square law), like an undergraduate textbook.
- 1
The MOSFET as an IC building block
g_m, r_o and intrinsic gain versus size and bias, with the small-signal model.
- 2
Current mirrors
Draggable mirror, W/L ratio, compliance, plus cascode, Wilson and BJT variants.
- 3
Single-stage amplifiers
Common-source and source follower with a solved transfer curve and swing limits.
- 4
Cascode amplifier
Five load configurations compared: gain, output resistance and headroom.
- 5
Differential pair
Watch the tail current steer between legs; gain, linear range and CMRR.
- 6
Five-transistor OTA
Live diff pair with mirror load: gain, GBW, slew rate and signal ranges.
- 7
Two-stage op-amp and compensation
Tune C_c and R_z: Bode plot, phase margin and step response.
- 8
Bandgap reference
Add CTAT and PTAT voltages until V_REF goes flat over temperature.
- 9
Matching and layout
Arrange unit cells; common centroid, dummies and Pelgrom mismatch.
- 10
Noise
Thermal and flicker noise, corner frequency and integrated noise.